HP Integrity RX2660 Manual page 4

Adding a boot disk entry

Hide thumbs Also See for Integrity RX2660:

6. When the EFI Boot Manager Menu appears, press the Down arrow key to move the cursor to Boot

Configuration, and then press <Enter>. This must be done quickly as there is about fifteen seconds to

respond.

NOTE: If more than one bootable disk is inserted, then multiple entries will appear instead of the one (two-line)

entry seen in this example. The first entry will be for the bootable disk in the lowest-numbered slot.

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

2660 B

OOT

ISK

permission of HSQ Technology is prohibited.

PAGE: 4 of 11

NTRY