Sony Handycam DCR-TRV480E Operation Manual page 79

Notes
b
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
• You cannot adjust the balance for tapes recorded on other devices in the Hi8
8 mm
LCD SET
The recorded picture will not be affected by this setting.
LCD BRIGHT
See page 18 for details.
LCD BL LEVEL
You can adjust the brightness of the LCD screen's backlight.
GNORMAL
BRIGHT
Notes
b
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
Touch
A/V c DV OUT
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
GOFF
ON (
system.
Standard brightness.
Select to brighten the LCD screen.
/ to adjust the color on the LCD screen.
Low intensity
Select when not using the Digital convert function.
)
To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to "Connecting an analog VCR to the computer via
your camcorder" (p. 114).
High intensity
Using the Menu
/standard
,continued
79