Sony Handycam DCR-TRV361 Operation Manual page 79

A/V c DV OUT
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
GOFF
ON (
PB MODE
For DCR-TRV460:
GAUTO
Note
b
• The setting returns to [AUTO] when you disconnect the power source from your camcorder
or slide the power switch.
USB-CAMERA
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming).
For details, refer to the "Computer Applications Guide."
GOFF
USB STREAM
Select when not using the Digital convert function.
) To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to the "Computer Applications Guide."
Select to automatically detect the system (Hi8
or Digital8
back the tape. During switching of systems, the screen turns blue, and
the following displays appear on the screen. A hissing noise also
sometimes can be heard.
t
standard 8 mm
t
/
to Digital8
/
Select to play back a tape that was recorded on other devices in the Hi8
/standard 8 mm
automatically detect the recording system.
Select to deactivate the USB Streaming function.
Select to activate the USB Streaming function.
) that was used to recorded on the tape, and play
/ : During switching from Digital8
.
: During switching from Hi8
.
system when your camcorder does not
/standard 8 mm
to Hi8 /
/standard 8 mm
,continued
79
Using the Menu