FRAME REC
INTERVAL REC
70
Using the Menu
Tips
z
• You can select the first picture for the slide show by touching
[START].
• If movies are played in the slide show, you can adjust the volume by touching
(decrease)/
(increase).
You can record pictures with a stop-motion animated effect by alternately frame
recording and then moving the subject a little. Operate your camcorder using the
Remote Commander to prevent camera shake.
GOFF
Select to record in the standard recording mode.
ON (
)
Select to record pictures using the FRAME REC function.
1
2
3
4
Notes
b
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
You can achieve excellent recordings of flowers blooming, etc., with this
function. Connect your camcorder to the wall outlet using the supplied AC
Adaptor during the operation.
[a]
[a]
[b]
a: [REC TIME]
b: [INTERVAL]
1
Touch
.
2
Touch [INTERVAL].
3
Select a desired interval time, then touch
You can select from 30 seconds, 1, 5 or 10 minutes for the interval.
4
Touch [REC TIME].
5
Select a desired recording time, then touch
You can select from 0.5, 1, 1.5 or 2 seconds for the recording time.
6
Touch [END].
7
Touch [ON], then
Select [ON], then touch
Touch
.
Press REC START/STOP.
A picture (approximately 6 frames) is recorded, and your
camcorder enters the standby mode.
Move the subject and repeat step 3.
[b]
.
/
before touching
.
.
.