Honda C200 1963 Shop Manual page 38

32 ----------------------------
3. E N G I N E - - - - - - - - - - - - - - - - - - - - - - -
J.
Disassembling
1. Remove clutch as described in 3-5 C.
2. Remove 18 mm circlip on::l primary driven gear. Shift mechanism con be seen.
3. Remove shift drum stopper and pull gear shift drum forward as shown by the arrow
in the diagram.
(fig.
3-41 ) The shift mechanism con be removed.
K. Assembling
1. Assemble gear shift shaft in the reverse procedure from that described in 3-5
J
3.
CAUTION
When assembling, check the movement of the three parts shown with arrows and also check
to see that the shift return spring is not bent. (Fig.
3-42)
2. Place shift drum stopper in position and install driven gear.
3. Fit clutch assembly and right crankcase cover as described in 3-5 D.