Table of Contents
Advertisement
Power on the Base Station
STEP 4
Plug the included AC adpter into the POWER port. The Ooma logo will blink red for a few minutes.
When it turns blue, the Base Station is ready.
If your Base Station needs a software upgrade, the Ooma logo will blink purple while it is
downloading the newest version. This may take 5-10 minutes. Do not unplug the Base Station
while it is upgrading. It will automatically reboot after the upgrade is done.
When your Ooma Base Station returns to solid blue, this indicates that your Ooma service
is working.
If your Ooma Base Station maintains a solid purple, this indicates that your Ooma service is
working and Do Not Disturb is enabled. All incoming calls will be directed to voicemail.
6
Ooma-Telo-PhoneGenie-QSG_EN-Feb-2019-R4.indd 7-8
Connect a Phone
STEP 5
Make sure your Base Station is plugged in and that it has powered on and downloaded
any applicable updates. Then, using an existing corded or cordless phone, plug the
other end of the cord into the PHONE port.
Corded or Cordless Phone
7
2/21/19 11:39 AM
Advertisement
Table of Contents
