Searching For The Starting Point; (End Search) - Sony Handycam DCR-HC62 Operating Manual

Unavailable settings during Easy
Handycam
During Easy Handycam operation, some
items are unavailable. If an attempted
setting is not available, but still desired,
touch [SET] to display an on-screen
instruction. Follow the instruction to cancel
Easy Handycam operation and then select
the setting.
.~.
Tips
• If [SET] is not displayed in step 3, follow the
instruction on the screen.
Searching for the
starting point
[END SEARCH] will not work once you
eject the cassette after you have recorded on
the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 22).
Touch
~4:n)I--+
80.
....GOmin S! )( 1 0:00:00
ENO-SEARCH--------··--
EXECUTING
IICANCELII
I
Touch here to cancel the operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
" Notes
• [END SEARCH] will not work correctly when
there is a blank section between recorded
sections on the tape.
.
~.
Tips
• You can also select [END SEARCH] from the
menu. When the PLAY/EDIT lamp lights up,
select the [END SEARCH] short-cut in Personal
Menu (p. 34).
•
Continued"
29