Cleaning The Front Of The Appliance And The Side Panels - Miele KFN 29683 D obsw Operating And Installation Instructions


Risk of damage as a result of
incorrect cleaning.
The telescopic runners contain a
special lubricant which can be
washed out during cleaning,
damaging the runners.
Wipe the telescopic runners with a
damp cloth to clean them.
 Leave the door open to air the
appliance for a short while and to
prevent odours building up.
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove.
Surfaces may suffer discolouration or
damage.
Therefore, it is best to remove soiling
from the appliance front and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces. Scratches on
glass fronts can lead to breakage in
some circumstances.
See the information on "Cleaning
agents" at the beginning of this
section.
Cleaning and care

Risk of damage as a result of
incorrect cleaning.
The glass front can alter or discolour
if you spot-clean it or remove soiling
when it is dry.
Wipe the entire surface of the glass
front with a wet cloth.
Using a glass-cleaning agent
containing additives, e.g. citrus or
similar, would cause streaking on the
entire surface.
Use a glass-cleaning agent which
contains a little alcohol but no citrus
or similar additives.
 Clean the entire outer surface with a
clean, fluff-free microfibre cloth, a
dash of washing-up liquid and plenty
of hot water.
 After cleaning, wipe with clean water
and dry with a soft cloth.
 If necessary, you can also use a
glass-cleaning agent which contains
a little alcohol but no citrus or similar
additives. We also recommend the
Miele ceramic and stainless steel
cleaner.
67