Maintenance and Adjustment
Headlight Adjustment
1.
Headlight assembly mounting bolt
To adjust the headlight beam:
•
Always make sure the handlebars
are in the straight ahead position.
•
Vertical adjustment of the headlight
beam is controlled by loosening the
headlight assembly mounting bolts
and altering the position of the
headlight assembly.
•
Retighten the headlight assembly
mounting bolts after adjustment to
10 Nm.
156
Rear Light
The LED rear light units are sealed,
maintenance free LED units. The rear
light assembly must be replaced in the
event of the failure of the rear light.
Multifunctional Rear Lights
1
(if fitted)
The multifunctional rear light units
operate as the rear position light, brake
light and direction indicators.
The multifunctional rear light units are
a sealed, maintenance free LED unit and
must be replaced in the event of the
failure of the rear lights.
Direction Indicator Lights
The direction indicator light units are
sealed, maintenance free LED units. A
direction indicator light unit must be
replaced in the event of the failure of
the direction indicator light.
License Plate Light
The license plate light unit is a sealed,
maintenance free LED unit. The license
plate light unit must be replaced in the
event of the failure of the license plate
light.