Watching On A Tv Screen - Sony CCD-TRV112 Operating Instructions (primary manual) Operating Instructions Manual

Watching on a TV screen

Connect the camcorder to your VCR or TV to watch the playback picture on the TV
screen. When monitoring the playback picture by connecting the camcorder to your
TV, we recommend you to use the house current for the power source.
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion
may occur.
Connecting directly to a VCR / TV with Video / Audio input jacks
If your TV is already connected to a VCR
Open the jack cover and connect the camcorder to the LINE IN inputs on the VCR by
using the supplied A/V connecting cable. Set the input selector on the VCR to LINE. Set
the TV/VCR selector on the TV to VCR.
: Signal flow
If you connect directly to TV
Connect the camcorder to the inputs on the TV by using the supplied A/V connecting
cable. Set the TV/VCR selector on the TV to VCR.
To connect to a VCR or TV without Video/Audio input jacks
Use the RFU-95UC RFU adaptor (not supplied).
: Signal flow
CCD-TRV12/TRV22/TRV33/TRV112/TRV212 3-859-057-15.E
29