Editing; Dubbing A Tape - Sony Handycam CCD-TR517 Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Set the input selector on the VCR to LINE.
(3) Set the POWER switch to PLAYER.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
To prevent deterioration of pictures from dubbing
Set EDIT to ON in the menu settings before dubbing.
You can edit on VCRs that support the following systems
8 mm,
Betamax,
38
the recorded tape into your camcorder.
Refer to the operating instructions of your VCR for more information.
Refer to the operating instructions of your VCR for more information.
VIDEO OUT
AUDIO OUT
: Signal flow
Hi8, Digital8,
ED Betamax,
VHS, S-VHS,
mini DV or DV
IN
VIDEO
AUDIO
VHSC, S-VHSC,