Sony CCD-SC55 Operating Instructions (English and Spanishl) Operating Instructions Manual page 85

Picture
Symptom
The picture jitters.
An unknown picture is displayed.
Others
Symptom
The supplied Remote Commander does
not work.
The CHARGE lamp flashes after you
charge the battery pack installed in the
camcorder.
No function works though the power is
on.
AC power adaptor
Symptom
The VTR/CAMERA or CHARGE lamp
does not light.
The CHARGE lamp flashes.
Cause and/or corrective actions
• A tape where video game pictures are recorded is
played back with TBC set to ON in the menu system.
m Set TBC to OFF. (p. 33)
• A tape in a poor condition, such as a tape recorded
repeatedly, is played back with TBC set to ON in the
menu system.
m Set TBC to OFF. (p. 33)
• The camcorder is operating in Demo mode.
m Exit Demo mode. (p. 98)
Cause and/or corrective actions
• COMMANDER is set to OFF in the menu system.
m Set it to ON. (p. 31)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 100)
• The batteries are dead.
m Insert new ones. (p. 100)
• The camcorder is not malfunctioning.
• Disconnect the connection plug on the battery pack or
on the AC power adaptor, then reconnect it in about 1
minute. Turn the power on. If the functions still do
not work, press the RESET button on the camcorder
using a sharp-pointed object. (If you press the RESET
button, all the settings including the date and time
return to the default.) (p. 95)
Corrective actions
• Disconnect the mains lead. After about 1 minute,
reconnect the mains lead. (p. 7)
• See the chart on the next page.
85