Searching The Boundaries Of Recorded Date; Búsqueda De Los Límites De La Fecha De Grabación - Sony CCD-SC55 Operating Instructions (English and Spanishl) Operating Instructions Manual

Video camera recorder hi8
Hide thumbs Also See for CCD-SC55 Operating Instructions (English and Spanishl):
Table of Contents

Advertisement

Searching the
boundaries of
recorded tape
You can search for the boundary between
recording dates using the Date Code
automatically recorded on the tape.
There are two modes:
• Searching for the beginning of a specific date,
and playing back from there (Date Search)
• Searching for the beginning of all days, one
after another and playing back about 10
seconds of each (Date Scan)
Each time you press DATE SEARCH, the mode
changes as follows:
Date Search n Date Scan
To search for the beginning of a
specific date
(1) Set the POWER switch to VTR.
(2) Press DATE SEARCH on the Remote
Commander.
(3) When the current position is [b], press 0 to
search towards [a] or press ) to search
towards [c].
To scan the beginning of all days
(1) Set the POWER switch to VTR.
(2) Press DATE SCAN on the Remote
Commander twice.
(3) Press 0 or ). Date Scan starts.
1
2
DATE
SEARCH
56
Nothing
JUL.4.1996
DATE
DATE
SCAN
Búsqueda de los
límites de la fecha de
grabación
Usando el código de datos grabado
automáticamente en la cinta es posible buscar los
límites entre fechas de grabación.
Hay dos modos:
•Buscar el principio de una fecha específica y
reproducir desde aquí (búsqueda de fecha).
•Buscar el principio de todos los días, uno detrás
del otro, y reproducir aproximadamente 10
segundos de cada uno (exploración de fecha).
Cada vez que se pulsa DATE SEARCH, el modo
cambia de la siguiente manera:
Búsqueda de fecha n Exploración de fecha
Para buscar el principio de una fecha
específica
(1) Ajuste el interruptor POWER en VTR.
(2) Pulse DATE SEARCH en el mando a
distancia.
(3) Cuando la posición actual sea [b], pulse 0
para buscar hacia [a] o pulse ) para buscar
hacia [c].
Para explorar el principio de todos
los días
(1) Ajuste el interruptor POWER en VTR.
(2) Pulse DATE SCAN dos veces en el mando a
distancia.
(3) Pulse 0 o ). Empezará la exploración de
fecha.
JUL.5.1996
[a]
[b]
Nada
DEC.31.1996
[c]
3
REW
FF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Handycam ccd-sc55

Table of Contents