Recording From A Vcr Or Tv - Sony CCD TRV 64 E Operating Instructions Manual

Recording from a VCR or TV

You can record a tape from another VCR or a TV program from a TV that has video/
audio outputs. Connect the camcorder to the VCR or TV using the supplied A/V cable.
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Press r REC and the button on the right together on the camcorder at the
point where you want to start recording.
In recording and recording pause mode, S video and VIDEO/AUDIO jacks
automatically work as input jacks.
: Signal flow
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)
[a] to obtain a high quality picture.
If your VCR or TV is a monaural type, connect only the white plug for audio on both
the camcorder and the VCR or TV.
If your VCR or TV does not have an S VIDEO OUT jack, connect cable [b]. Do not
connect the S video cable (not supplied) [a] to the camcorder.
To check the picture from a VCR or TV before recording
Press P after pressing r REC. You can check the picture in the viewfinder or on the
LCD screen.
To stop recording
Press π.
50
1
POWER
CAMERA
OFF
VTR
S VIDEO
VIDEO
AUDIO
2
REC
(not supplied)
[a]
S VIDEO
VIDEO
[b]
TV
VCR
AUDIO