Danby DPAC120011H Owner's Use And Care Manual page 9

Operating Instructions
INDICATOR LIGHTS
ON THE DISPLAY
WINDOW
BUTTON FUNCTIONS
ON CONTROL PANEL
Timer on indicator
ON
Timer off indicator
OFF
Auto operation indicator
auto
Cooling operation indicator
Dry operation indicator
Fan operation indicator
Heating operation indicator
Fan Speed Indicator
Low ---------
Medium----
High --------
Display Window
Shows the set temperature in °C or °F and displays error codes.
Room temperature sensor error
Unplug the unit and plug it back in. If error repeats, call for service.
Evaporator temperature sensor error
Unplug the unit and plug it back in. If error repeats, call for service.
Condenser temperature sensor error
Unplug the unit and plug it back in. If error repeats, call for service.
E4
Display panel communication error
Unplug the unit and plug it back in. If error repeats, call for service.
PROTECTION CODE
Bottom tray is full
Remove the bottom drain plug and drain off the water.
NOTE: When P1 displays under COOL mode(or AUTO COOL mode) or
DRY mode, the unit will stop operating, but the upper fan motor will
continue to operate,and the lower fan motor will be controlled at high
speed.
1) MODE BUTTON
Press the MODE button to select the appropriate operating mode:
AUTO COOL DRY
auto
8
Sleep operationn
Turbo display
Turbo
FAN HEAT