Remove The Gs-Board; Remove The Plasma Panel Section From The Front Frame - Panasonic TH-42PX600U Service Manual

TH-42PX600U

6.24. Remove the GS-Board

1. Remove the stand bracket R. (See section 6.23.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the coupler (G52).
4. Remove the screws (×3
5. Remove the SD card unit.
6. Remove the screws (×2
cover.
7. Remove the GS-Board.
6.25. Remove the Plasma panel
section from the Front frame
(glass)
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (convered) with the
plasma panel surface facing download.
2. Remove the stand brackets (left, right) fastening screws (×2
each).
).
) and remove the GS-Board
3. Replace the servicing stand and stand the set.
4. Remove the front frame and the plasma panel fastening
screws (×12 ).
5. For leaving the plasma panel from the front frame, pull the
bottom of the front frame forward, lift, and remove.
16