6.15. Remove the SD-Board
1. Remove the screws (×4
2. Remove the flexible cables (SD1, SD2, SD3 and SD4) and
remove the bridge connector (SD46).
3. Slide the SD-Board to the left to disconnect from couplers
(SC43-SD43 and SC44-SD44) on the SC-Board and
remove the SD-Board.
6.16. Remove the SC-Board
1. Disconnect the couplers (SC2, SC20 and SC23).
2. Remove the screws (×10
).
) and remove the SC-Board.
6.17. Remove the SS2-Board
1. Unlock the cable clamper to free the cable.
2. Disconnect the coupler (SS23) and disconnect the flexible
cable (SS55).
3. Remove the screws (×2
6.18. Remove the SS3-Board
1. Unlock the cable clamper to free the cable.
2. Disconnect the coupler (SS22) and disconnect the flexible
cable (SS56).
3. Remove the screws (×2
15
TH-58PX600U
) and remove the SS2-Board.
) and remove the SS3-Board.