General Safety Guidelines; Work Safety Guidelines - Hitachi G1000 Hardware Manual

General safety guidelines

Observe the following general site guidelines:
• General requirements: The data center must comply with all applicable
• Fire protection: The data center must have an operational fire protection
• Hazards: The data center must be free of hazards (for example, cables on
• Equipment modifications: Do not make mechanical or electrical
• Earthquake Safety: To minimize personal injury in the event of an
• Cabling: Do not block walkways when routing cables. Do not place heavy
• Warning and safety labels: Safety warnings, cautions, and instructions
• Authorized personnel: Allow only qualified and authorized personnel (for

Work safety guidelines

Observe the following site guidelines:
• Do not wear loose clothing that could get caught in the equipment or
• Wear safety glasses when working under conditions that are hazardous to
• Do not perform any action that creates a potential hazard to people or
• Keep walkways clear of tools, power cables, and parts to prevent them
• Do not work on the equipment or disconnect cables during a
• Keep floors dry to prevent slips and falls.
• Do not use ungrounded power cables.
70
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide
safety regulations, standards, and requirements for installing and
operating industrial computer equipment similar to a storage system.
system appropriate for use with computer and electrical equipment.
the floor that can block access or cause people to trip).
modifications to the equipment. Hitachi Data Systems is not responsible
for regulatory compliance of a modified Hitachi Data Systems product.
earthquake, securely fasten the control and drive chassis to a rigid
structure extending from the floor to the ceiling or from the walls of the
room in which the system is located.
materials on cables. Do not place cables near any possible source of heat.
in various languages are attached to the storage system components. The
safety warnings provide guidelines to follow when working with any
equipment. Before working on the storage system, read all safety and
warning labels attached to it. If the labels become dirty, damaged,
unreadable, or peel off, contact the Hitachi Data Systems support center.
example, a certified electrician) to perform hazardous tasks.
mounting hardware. Fasten your tie or scarf and roll up your sleeves.
your eyes.
makes the equipment or rack unsafe.
from being stepped on or causing people to trip and fall over them.
thunderstorm, when wearing a wool sweater or other heavy wool clothing,
or when power is applied.
Safety requirements