In configurations with two RTU assemblies and one AC power sources there will
■
be two cables to connect, one in the front (on the left), and one in the rear of the
system (on the left) (
Caution – Connecting the alternate RTS units to outlets that use the same power
source as the default RTS units is not supported and will adversely affect reliability.
To power source A
Front
Sun Fire E6900 Configuration: Two RTU Assemblies and One AC Power
FIGURE 3-3
Source
In configurations with one RTU assembly and one AC power sources there will be
■
only one cable to connect (in the rear of the system on the left) ().
Caution – Connecting the alternate RTS unit to an outlet that uses the same power
source as the default RTS unit is not supported and will adversely affect reliability.
Front
Sun Fire Cabinet for Sun Fire E4900 Configuration: One RTU Assembly and
FIGURE 3-4
One AC Power Source
Every piece of support equipment requires its own customer-supplied circuit
breaker and receptacle(s).
).
FIGURE 3-3
RTS 0
default
RTS 1
alternate
alternate
Chapter 3 Environmental and Electrical Specifications
RTS 1
alternate
To power source A
RTS 0
default
Rear
RTS 1
RTS 0
default
To power source A
Rear
3-5