Device configuration
You create the device configuration for your PLC by adding a CPU and additional modules to
your project.
①
②
③
④
⑤
To create the device configuration,
add a device to your project.
In the Portal view, select
In the Project view, under the
S7-1200 Programmable controller
System Manual, 11/2009, A5E02486680-02
Communications module (CM): Up to 3, inserted in slots 101, 102, and 103
CPU: Slot 1
Ethernet port of CPU
Signal board (SB): up to 1, inserted in the CPU
Signal module (SM) for digital or analog I/O: up to 8, inserted in slots 2 through 9
(CPU 1214C allows 8, CPU 1212C allows 2, CPU 1211C does not allow any)
"Devices & Networks" and click
"Add device".
project name, double-click "Add
new device".
4
69