Installing The Dc/Dc Board - Toshiba Satellite A665 Series Maintenance Manual

4.23 DC/DC Board
2. Disconnect the two cables and remove the DC/DC board from the LCD assembly.
Figure 4.43 Removing the DC/DC board the display assembly

Installing the DC/DC Board

Install the DC/DC Board according to the following procedures.
1. Connect the two cables to the DC/DC board.
2. Seat the DC/DC board in the correct position and gently push down on the left and right
edges until it snaps into place.
Satellite A660/A665/A660D Maintenance Manual
4 Replacement Procedures
4-55