Table 4-1. Infrared (Ir) Buttons On Hmi Module - Emerson FB2100 Instruction Manual

Figure 4-2. Infrared (IR) Button Location
Note
When using the IR buttons, aim your finger at the round spot just below the arrow.
Operation
1 Left Infrared (IR) Button
2 Down Infrared (IR) Button
3 Up Infrared (IR) Button
4 Right Infrared (IR) Button

Table 4-1. Infrared (IR) Buttons on HMI Module

Button Mode
Screen Saver
OR
Data Entry
Idle Mode
Screen Saver
Data Entry
Data Entry
Emerson FB2100 Flow Computer Instruction Manual
Use
▪ Tap once to move up or down one item through list
of parameters.
▪ Hold to stay on current parameter.
▪ Tap (UP) once to move the cursor to the previous
character in the list or (DOWN) once to move the
cursor to the next character in the list.Hold (UP) or
(DOWN) to scroll quickly through the character list.
Hold to wake the display (if screen is off)
Log out (if logged on)
▪ Tap once to move the cursor to the left.Hold to
perform action shown on screen (such as "Hold to
Accept")
▪ Tap once to move the cursor to the right.Hold to
perform action shown on screen (such as "Hold to
Cancel")
D301783X012
March 2019
77