Software Tools; Rohs2 Compliance; Physical Security - Emerson FB2100 Instruction Manual

1.10

Software Tools

The FBxConnect configuration software provides a series of wizards that allow you to perform
configuration activities for the flow computer. You connect a PC running the FBxConnect
configuration software to the flow computer using one of the communication ports or through a
wireless connection. You can then:
▪
▪
▪
▪
▪
1.11

RoHS2 Compliance

Device without Integral MVS or SP Sensor:
RoHS (2) EU Directive 2011/65/EU
Device with Integral MVS or SP Sensor:
RoHS (2) EU Directive 2011/65/EU: This product may be considered out-of-scope when used for
the intended design purpose in a Large Scale Fixed Installation (LSFI).
Consult
1.12

Physical Security

The flow computer enclosure includes provision for you to padlock the door shut. The fiberglass
enclosure supports two padlocks (left in
(right in
Figure 1-6. Possible Padlock Locations
1
Holes in the door latches of the fiberglass enclosure allow you to attach a wire seal.
Introduction
Set parameters within your application
Configure I/O channels
Specify the serial communication method for a port (RS-232 to RS-485) as needed
View or collect audit trail information such as alarm, event, or historical logs
Update system firmware
https://www.emerson.com/compliance
Figure 1-6).
Location where customer-supplied padlocks can be used to lock the door
Emerson FB2100 Flow Computer Instruction Manual
for up-to-date product information.
Figure 1-6); the aluminum enclosure supports one padlock
D301783X012
March 2019
9