Power Management - Philips E Series User Manual

6. Power Management

6. Power Management
If you have VESA DPM compliance
display card or software installed in
your PC, the monitor can automatically
reduce its power consumption when
not in use. If an input from a keyboard,
mouse or other input device is detected,
the monitor will 'wake up' automatically.
The following table shows the power
consumption and signaling of this
automatic power saving feature:
321E1SC:
Power Management Definition
VESA
Video H-sync
Mode
Active ON Yes
Sleep OFF No
Switch
OFF -
Off
322E1C:
Power Management Definition
VESA
Video H-sync
Mode
Active ON Yes
Sleep OFF No
Switch
OFF -
Off
325E1C:
Power Management Definition
VESA
Video H-sync
Mode
Active ON Yes
Sleep OFF No
Switch
OFF -
Off
V-sync Power Used LED Color
37.00 W (typ.)
Yes
43.70 W(Max.)
No 0.5 W (typ.)
- 0.3 W (typ.)
V-sync Power Used LED Color
40.60 W (typ.)
Yes
50.40 W(Max.)
No 0.5 W (typ.)
- 0.3 W (typ.)
V-sync Power Used LED Color
47.30 W (typ.)
Yes
60.50 W(Max.)
No 0.5 W (typ.)
- 0.3 W (typ.)
328E1C:
Power Management Definition
VESA
Video H-sync
Mode
Active ON
Sleep OFF
Switch
OFF
Off
The following setup is used to measure
power consumption on this monitor.
• Native resolution:
321E1SC/322E1C: 1920x1080
325E1C: 1920x1080(analog
input)&2560x1440(digital input)
328E1C: 3840x2160
• Contrast: 50%
White
• Brightness: 90%
White
(blink)
• Color temperature: 6500k with full
white pattern
OFF
Note
This data is subject to change without
notice.
White
White
(blink)
OFF
White
White
(blink)
OFF
27
V-sync Power Used
49.30 W (typ.)
Yes Yes
70.50 W(Max.)
No No 0.5 W (typ.)
- - 0.3 W (typ.)
LED Color
White
White
(blink)
OFF