Cording Foot; Cording Foot - Bias Ruffle - Bernina Sergers Owner's Workbook

BERNINA

Cording Foot - Bias Ruffle

Fabric .................................... mediumweight fabric, 3" x 18", cut on bias
...........................................................nylon fishing line, 15-20# test, 24"
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 2 cones serger thread
..........................................................................1 cone YLI Woolly Nylon
Presser Foot ................................................................................Cording
Stitch ........................................................................3-thread rolled edge
Set the serger for a 3-thread rolled edge (right needle) with Woolly
Nylon in the upper looper. Adjust settings as directed in your owner's
manual.
Pull the rolled hem lever towards you.
Adjust the stitch length to 1.75mm.
Set cutting width at 1.5.
Attach the Cording Foot.
Following the directions in the instruction leaflet for the Cording Foot,
insert the nylon fishing line through the guide.
Place the fabric under the presser foot and serge along one 18" edge
stretching the fabric edge as you sew.
Return stitch length and thread tension levers to normal.
Return the rolled hem lever to normal sewing position.
Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Sergers
®
S 2/15/03
ERGER
Mastering
Your
BERNINA
Notes
® Dealers
®
84