Step Six: Configure The Dial Plan - Cisco TelePresence ISDN GW MSE 8321 Getting Started Manual

Configuring the ISDN GW MSE 8321

Step six: Configure the dial plan

By default the ISDN GW MSE 8321 rejects all calls. To enable calling with the ISDN
GW MSE 8321 you must configure a dial plan with at least one dial plan rule for each
direction in which you want calls to be accepted (IP to ISDN and/or ISDN to IP).
Although the ISDN GW MSE 8321 supports advanced dial plan capabilities, we
recommend that you define just a simple dial plan to get started. The online help
topic "Getting started with the gateway" explains how to create a suitable basic dial
plan.
Information about setting up and managing more complex dial plans, including
advanced settings and examples, is available in the "Dial plan" section of the online
help.
12