9.7.2.
Disassembling the Optical Pickup Unit
1. Remove the 2 screws A and remove the TRV feed rack.
2. Remove the 2 screws B and remove the Terminal FPC and shaft spring.
3. Remove the optical pickup.
9.7.3.
Cautions to Be Taken When Replacing the Optical Pickup
x x x x An antistatic flexible sheet (FPC) is connected with the new optical pickup.
Replace the optical pickup according to the following procedure.
1. Install the Terminal FPC, TRV feed rack and shaft spring on the optical pickup. (See Fig. 1)
2. Install the Terminal FPC in the connector on the Terminal P.C.B..
Fig. 1
Fig. 2
31