Updating Firmware - Denon DVD-1600 Service Manual

8.2. How to use recovery disc
8.2.1. Performing recovery
1. Load the recovery disc RFKZD5TR007 on to the player and run it.
2. Recovery is performed automatically. When it is finished, a message appears on the screen.
3. Remove the recovery disc.
4. Turn off the power.
8.2.2.

Updating firmware

1. Load the recovery disc RFKZD5TR007 on to the player and run it.
2. Firmware version of the player is automatically checked. Appropriate message appears whenever necessary.
3. Using remote controller´s cursor key, select whether version updating is to be done or not. (Selection of Yes/No)
4. a. If Yes is selected, version updating is performed.
b. If No is selected, only recovery is performed.
5. a. When updating is finished, remove the disc according to the message appearing on the screen.
b. Remove the disc according to the message appearing on the screen.
6. Turn off the power.
15