Denon DCD-A100 Service Manual page 11

5.2 Store the current value of the laser current : CD
(1) Current value "T22" is selected.
FL Display (The display part of 13 digits)
1 2 3 4
- - - T 2 2 - n n n n - -
(2) Press the 1 / 3 button for at least 5 seconds, and "SAVE?" is displayed.
FL Display (The display part of 13 digits)
1 2 3 4
- - - T 2 2 S A V E ? - -
(3) Press the 8 or 9 button to select "T21".
FL Display (The display part of 13 digits)
1 2 3 4
- - - T 2 1 - m m m m - -
(4) Press the 1 / 3 button and store the current value "T21". After "OK?" is displayed, stored value "T21" is displayed.
FL Display (The display part of 13 digits)
1 2 3 4
- - - T 2 1 - - O K ! - -
(5) Press the 2 button to display the current value "T22" without storing the current value "T21".
6. Resetting the accumulated laser on time
To clear the accumulated laser on time, press the 1 / 3 button while the accumulated laser on time is displayed until
" ＊ CLR?" appears at the "nnnnn" position, then press the 8 or 9 button to select TB3. If the 1 / 3 button is
pressed while TB3 is displayed, the accumulated laser on time of CD and DVD(SACD) is cleared.When "TB1" or "TB2"
is selected with the 8 or 9 button, "nnnnn" is displayed as 0 so you can check.
FL Display (The display part of 13 digits)
1 2 3 4
- - - T B Y n n n n n - -
( : Off, Y：1: CD, 2: DVD(SACD), nnnnn: Hour [h])
-
5 6 7 8 9 10 11
5 6 7 8 9 10 11
5 6 7 8 9 10 11
5 6 7 8 9 10 11
5 6 7 8 9 10 11
12 13
12 13
12 13
12 13
12 13
11