Table Of Contents - Bernina 8 SERIES V29.39.00 Software Update

Information on Software Update
BERNINA 830 / 820
Software Version
1 General Changes
1.1 Language "Finnish" integrated
1.2 Display of data version number
2 Sewing Updates
2.1 Thread tension for the underlay segments (buttonholes)
2.2 Manual threading
2.3 The use of straight stitch feet with thread cutting
2.4 Disable automatic thread cutting when opening the bobbin door
2.5 Thread cutting without fabric movement
2.6 "Manual" winding of the lower bobbin thread
2.7 Winding indicator during sewing/embroidery
2.8 Reset of back stepping history
2.9 Thread breakage hint
2.10 Problem with Foot #57D and straight stitch plate compatibility
2.11 Presser Foot #0 can be used for automatic threading. With the "Walking foot"
automatic threading is not possible
2.12 Information Foot #2a corrected
2.13 Pattern #169 improved
2.14 Tension changed for the "tie on" stitches
2.15 Upper thread detection changed
3 Embroidery Updates (BERNINA 830 only)
3.1 Start of embroidery
3.2 Using zoom option with panning
3.3 Using Foot #44C (The new CutWork & Echo quilting foot)
3.4 Thread tension can be changed to a minimum of 0.5
3.5 Stop for manual cutting can be switched off
3.6 Manual "tie on" for embroidery
3.7 Delay of Start/Stop button reduced for embroidery
3.8 Thread breakage during jump stitches
3.9 Stitching "without thread", shown now in embroidery mode
4 Important points
4.1 Hoop calibration
4.2 Feedback issues
4.3 Free memory
2/14, 04.11.2009
3
3
3
3
4
4
5
5
5
5
5
6
6
7
7
8
8
9
9
9
10
10
10
10
11
12
12
13
13
13
13
13
13
13