Advertisement
2. Check the Status Window to verify that there is a connection to the internet. If an error such
as that shown to the right (see Image 9) is displayed, unplug the AC adapter from the outlet to
turn power OFF.
3. After waiting about one minute, plug the AC adapter into the outlet to turn power ON.
4. The Status Window will open. Check if there is a connection to the internet. (See Image 10.)
5. If the problem persists after repeating Steps 1-4, contact Nintendo Zone Support.
(17)
9
Distribution Stopped
Status: Error 5-51099
Cannot connect to wireless LAN
2007/12/25
Continuous Activation Time
00h 00m 05s
10
Distributing Contents
Status: Normal
Waiting for connection with DS
2007/12/25
Continuous Activation Time
00h 00m 33s
(18)
7. Using SD Cards (Please confirm the service you are using uses SD cards)
When using an SD card, follow the procedure below to insert the SD card.
WARNING: When the Nintendo Zone Box is mounted on a wall, remove it from the wall before
performing the following operation.
1. Unplug the AC plug of the AC adapter from the outlet to turn power to the device OFF.
Note: Do not perform this operation with the power ON.
2. Use a Phillips head screwdriver to loosen the screw on the SD card slot cover and then
remove the SD card slot cover. (See Image 11.)
Note: Please use an appropriate screwdriver for the screw. Not doing so may damage the screw
hole and the SD card slot cover may not be removable.
3. Firmly insert the SD card in the proper direction until a click is heard.
13:23
Number of Downloads
0
13:21
Number of Downloads
0
Advertisement
