10 Self-check Function
Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
10.1. Check of the IIC bus lines
10.1.1. How to access
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.
10.1.2. Exit
Disconnect the AC cord from wall outlet.
10.1.3. Screen display
10.1.4. Check Point
Confirm the following parts if NG was displayed.
23
TC-26LX70 / TC-32LX70