Electrolux EVE614 User Manual page 17

Additional Functionality
Setting the countdown timer
Use this for timing any activity. For example boiling eggs.
1. Touch the button, the display will flash.
2. Set the countdown time you want by using
–
. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the
+
adjusting using or
change the timer will stop flashing, confirming the
timer has been set.
3. To cancel the timer touch the
will flash. Then touch and hold
until the timer is cleared.
4. To stop the beeper, touch any button.
NOTE: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer touch and hold both the
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven temperature
during pre-heating of the oven can be displayed by
touching the button. During normal operation the set
temperature can be reviewed by touching the
NOTE: this temperature will only be displayed for
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched off
by touching and holding the
off. Also the light can be turned on from the standby state
by touching and holding the
comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch off the appliance using the function
selector switch.
2. Touch and hold the
time until the word 'SAFE' is displayed and a double
beep is sounded. The word SAFE will be replaced by
a padlock symbol on the display after 5 seconds.
+
button again and
–
. 5 seconds after the last
button, the display
and buttons
and
button.
button until the light turns
button until the light
and buttons at the same
Releasing the child-proof lock
Touch and hold the
until a double beep is sounded. This will commence to
unlock the door and after 5 seconds the oven is ready
for use.
and
Activating the function lock
The active function can be locked so it is not changed
unintentionally.
1. The active function can be locked, to activate touch
and
2. If the oven is switched-off while in 'Loc' it will
switch into Child lock mode and the display will
show 'SAFE'.
3. Oven can be released the same way as 'Releasing
the child proof lock'
Safety Cut-out feature
The oven automatically switches itself off if the temperature
is not adjusted or the appliance is left operating after a
period of time. The oven switches itself off after:
• 12.5 hours when the temperature is set less
than 120°C.
• 8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
• 5.5 hours when the temperature is set to 200°C
or above, and below 250°C.
• 3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (e.g. in a
retail store). In this mode the display works and functions
can be set but the oven does not actually heat. When
in this mode the text 'DEMO' will be lit. The following
instructions show how to enter and exit 'Demo' mode.
1. Ensure the oven is in the off state. Toggle and hold
the selector to
text will begin to flash.
2. Toggle the temperature selector to set the first digit of
display to 2. Touch clock to set.
3. Repeat step 2 until display shows 24:68. 3 beeps
sound and DEMO will be shown.
4. To disable DEMO mode repeat steps 1 - 3.
and buttons at the same time
together until 'Loc' is displayed.
+
until a beep sounds. The 'DEMO'
17