Test Mode - Denon S-5BD Service Manual

5. Test mode

5.1. Entering the test mode
The test mode is entered by pressing the 2 and 9 buttons simultaneously, plug the AC cord into a power outlet.
FL tube display when test mode entered
FL Display (The display part of 16 digits)
1 2 3 4 5
When the test mode is set, a color bar appears on the monitor.
5.2. Selecting the mode
・ The following modes are available.
(1) Laser on/off (CD/DVD/BD) mode
(2) Servo adjustment value display mode
(3) Error rate (skew) measurement mode
(4) Accumulated laser on time display mode
(5) Track buffer output mode
(6) Picking up No. display mode
(7) Error log display mode
(8) Test mode cancel
q When the 9 button is pressed after entering the test mode, the display switches in the order: "T2, T3, T7, TC, TE,
TG, TH, TI, T2 ..."
FL Display (The display part of 16 digits)
1 2 3 4 5
T 2
FL Display (The display part of 16 digits)
1 2 3 4 5
T 3
FL Display (The display part of 16 digits)
1 2 3 4 5
T 7
FL Display (The display part of 16 digits)
1 2 3 4 5
T C
FL Display (The display part of 16 digits)
1 2 3 4 5
T E
FL Display (The display part of 16 digits)
1 2 3 4 5
T G
FL Display (The display part of 16 digits)
1 2 3 4 5
T H
FL Display (The display part of 16 digits)
1 2 3 4 5
T I
w When the 8 button is pressed, the display switches in the opposite order fromq above, starting from the current
position (for example, if currently at "TI", it switches as follows: "TH, TG, TE, TC, T7, T3, T2, TI, TH ..."). s
6 7 8 9 10 11
T E S T
:
:
:
:
:
:
:
:
6 7 8 9 10 11
L a s e r O n O f f
6 7 8 9 10 11
S e r v o
6 7 8 9 10 11
E r r o r
6 7 8 9 10 11
L a s e r O n T i m
6 7 8 9 10 11
T r a c k
6 7 8 9 10 11
O P U N u m b e r
6 7 8 9 10 11
E r r o r
6 7 8 9 10 11
T e s t E x i t
12 13 14 15 16
M O D E
T2
T3
T7
TC
TE
TG
TH
TI
12 13 14 15 16
12 13 14 15 16
A d j .
12 13 14 15 16
R a t e
12 13 14 15 16
12 13 14 15 16
B u f
12 13 14 15 16
12 13 14 15 16
L o g
12 13 14 15 16
24