Samsung SGH-ZX20 User Manual page 77

Hide thumbs Also See for SGH-ZX20:
Table of Contents

Advertisement

Slove problems
"No service," "Network failure," or "Not done"
displays
The network connection has been lost. You may be in a
weak signal area. Move and try again.
You are trying to access an option for which you have
no subscription with your service provider. Contact the
service provider for further details.
You have entered a number but it was not dialled
Be sure that you have pressed [
Be sure that you have accessed the right cellular
network.
Be sure that you have not set an outgoing call barring
option.
Your correspondent cannot reach you
Be sure that your phone is switched on. ([
for more than one second.)
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call barring
option.
Your correspondent cannot hear you speaking
Be sure that you have switched on the microphone.
Be sure that you are holding the phone close enough
to your mouth. The microphone is located at the
bottom of the phone.
74
The phone starts beeping and "Battery low"
flashes on the display
The audio quality of the call is poor
].
No number is dialled when you re-call a
Phonebook entry
] pressed
If the above guidelines do not help you to solve
the problem, take note of:
Then contact your local dealer or Samsung after-sales
service.
Your battery is insufficiently charged. Recharge the
battery.
Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
Try moving the phone slightly or moving closer to a
window if you are in a building.
Use the Contact list feature to ensure the number has
been stored correctly.
Re-store the number, if necessary.
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
) to weak ( ).

Advertisement

Table of Contents
loading

Table of Contents