Table of Contents
Advertisement
Menu functions
•
Retrieve option: determine whether the phone
retrieves headers only or the entire e-mail.
•
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
•
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
•
Leave a copy of messages on the server: leave
copies of e-mails after retrieving.
Block list: specify e-mail addresses from which
messages will not be accepted. You can also specify
message subjects that you will not accept.
Email account: set up your e-mail account(s) and
select the one to be used:
You cannot change e-mail account settings while an
e-mail is being sent or retrieved. Your e-mail
service provider can give you the information
needed for the below settings.
•
Current account: select an account.
36
•
Account settings: configure up to five e-mail
accounts using different e-mail servers.
The following options are available for each
account:
In use: select this option to use the account and
to display the account in the Inbox.
Account name: enter a name for the currently
selected account.
User name: enter a name to be displayed as the
sender's name in your outgoing e-mails.
Email address: enter your e-mail address.
Reply address: enter the e-mail address to which
you want recipients to send reply messages.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
Advertisement
Table of Contents
