Table of Contents
Advertisement
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
APOP login: connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4:
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
Include attachments: select this option to
receive attachments with e-mails.
Max. Emails retrieved: set the number of
headers you will retrieve from the server.
Email profile: configure the network settings
required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
Current profile: select a profile.
•
Profile settings: configure up to five e-mail
profiles. For each profile, the following options are
required to connect to the GPRS network:
Profile name: enter a name for the e-mail profile.
APN: enter the access point name used for the
GPRS network address.
Login ID: enter the user ID.
Password: enter the password.
DNS1: enter the primary address.
DNS2: enter the secondary address.
Push Message
You can change the settings for receiving WAP push
messages from the wireless web server. The following
options are available:
•
Receive: set how your phone receives WAP push
messages.
•
Service centre: specify the address of the server
from which you want to receive WAP push
messages, the Receive option is set to SMS-C
specific.
37
Advertisement
Table of Contents
