Electrolux 98030KF-SN User Manual page 48

48
Operating the appliance
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains
activated afterwards.
Step
1.
2.
Touch
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Switching the power function on and off
The power function
bring a large quantity of water to the boil quickly. The power function is activated for 8
minutes at most. After that the induction cooking zone automatically switches back to heat
setting 14.
To switch on
To switch off
Power Management
The cooking zones of the cooking surface have a
maximum power available to them. Maximum
power is reached if all cooking zones are set to a
heat setting of 14. Two cooking zones make up a
pair (see figure).
Between these cooking zones the maximum pow-
er available is distributed by the Power Manage-
ment. If the Power function is set for a cooking
zone, the additional power needed for this cooking zone is transferred by the Power Man-
agement reducing the power of the other cooking zone in the pair.
Example: heat setting 14 is selected on a cooking zone. The Power function is switched on
for the cooking zone paired up with it. The Power function is performed, but heat setting
14 on one cooking zone and Power function on the other cooking zone of a pair exceeds
the maximum output for both. Therefore Power Management reduces the first cooking
zone that was switched on from 14 to 5, for example, and the display for this cooking zone
alternates between 14 and 5 and then remains on the current maximum of 5. (Whether
the display alternates between 14 and 5 or 14 and 3 or other values, depends on the
appliance type and the size of the cooking zone.)
Control panel
Switch appliance on
for 4 seconds
makes more power available to the induction cooking zones, e.g. to
Touch
Touch a heat setting
Control panel
Display/Signal
lights up
Display
/