Table of Contents
Advertisement
Charge Input
USB Input
While the battery of
the Remote
Transceiver is under
charging.
C. MAIN PAGE:
1. Press the
button, the screen will display main page.
2. While the icon flashing on the OLED screen, press the
detail of the flash icon, the display sequence of flash icon as follows: TRIGGERED / ENGINE
RUNNING / COUNT DOWN TIMER / TIMER START / ALART TIMER condition.
While the
TRIGGERED icon
flash.
While the
icon flash
RST1000 OP REV.A
Push the
button; the
screen will display
Battery charging.
Push the
button to display
triggered area.
Push the
button
1. The remote transceiver equipped AC ADAPTOR (Output
Voltage: 4.2VDC – 5.5VDC and with same USB plug),
then you can charge the battery indoors.
2. Charging is difficult in places subject to extremely high/
low temperatures.
3. To protect the battery, it is recommended to temperature
charge in places with temperature of 5 C to 35 C (41 F to
95 F).
button, the OLED screen will display the
4
Jun/22/2009
Advertisement
Table of Contents
