Table of Contents
Advertisement
4
unit operation
STARTING THE ENGINE
IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way
meant to replace or supercede engine manufacturer's operating instructions. In order to obtain optimum
performance from your engine, refer to your engine manual.
BEFORE STARTING ENGINE:
•
Be sure that the unit is completely assembled, all fasteners are tightened securely, and all safety guards
and components are in place.
•
Be sure to check engine's oil and gasoline*. (See engine manual for recommended oil and gasoline
specifications.) Never check the engine while it is running or while you are smoking. Check only when
engine is cold.
* All machines are shipped without oil or gasoline unless otherwise noted.
•
Be sure that in-line fuel valve is set to open
position.
TO START ENGINE:
•
Set throttle control fully up to "Choke" position.
If your engine has an auxiliary choke, pull the
choke knob fully out to engage.
•
Turn ignition key to 'run' position.
CLOSED
OPEN
GVTP SM32-R0303.1
Advertisement
Table of Contents
