Canon iR1018 Series Portable Manual page 19

Code Name
0008 Document edge sensor
delay jam
0009 Document edge sensor
stationary jam
000a Paper absence (Pull out
the document.)
000c Delivery delay jam
000d Delivery stationary jam
0010 Pickup NG
Sensor No. Description
SR2002 The document edge sensor does not detect paper when the paper has been fed by the
predetermined distance since reception of a pickup request.
SR2002 The trailing edge of paper is not detected when the paper has been fed by the
predetermined distance since detection of it by the document edge sensor.
SR2001 The Document set sensor has been held off since start of pickup.
SR2002 In case the internal software signal "Delivery Sensor OFF" set in the system cannot
be detected, when the leading edge of paper is detected by the document edge sensor
and fed the prescribed distance, and after the paper's trailing edge is detected.
SR2002 In case the internal software signal "Delivery Sensor ON" set in the system cannot
be detected, when the paper feed request is received and the paper is fed the
prescribed distance, and the leading edge of paper is detected and paper is fed the
prescribed distance .
SR2003 The registration sensor has been held off since paper pickup started.
Chapter 3
9