Operating Instructions - TrekStor DataStation MAXI M.U Operating Instructions Manual

OPERaTING INSTRUcTIONS

Thank you for buying the TrekStor DataStation. We are confident that this product will be the source of much
enjoyment.
1) Connect the TrekStor DataStation to a PC
• Insert the provided power supply into an electrical outlet, and connect the cable to the "P
DataStation.
• Use the provided USB connection cable to connect the DataStation to a USB port in your PC.
• Turn on the DataStation with the on/off switch ( ).
Note for users of Windows® ME, 2000, XP, Vista and Mac OS X:
A driver is not necessary for these operating systems. If you use Windows® 2000, make sure that you have installed at least
service pack 4, and Windows® XP requires service pack 2 or above.
Note for users of Windows® 98 (SE):
First install the driver before connecting the DataStation to your PC!
• Insert the provided CD into the CD ROM drive of your PC.
• Select the desired language by clicking a flag on the right; the TrekStor menu then appears in a dialog window.
• Click "d W
river for indoWs
• Restart your PC to activate the installed driver.
2) Exchanging data with the TrekStor DataStation
• Select the desired files or folders with your mouse. Copy these files by clicking them with your right mouse button
and then selecting "c
• Under "m c ", select the local disk "t
y omPuter
• Click it with your right mouse button, and select "P
available on the DataStation.
® 98", and follow the installation instructions.
".
oPy
s
reK
".
tor
" to start copying. After copying is over, the data will be
Aste
– 5 –
" connection of the
ower
EN