Reverse Operation - Snapper PRO GEAR EXPRESS SPE1250KW Safety Instructions And Operator's Manual

Pro gear express walk behind mowers mid-size series 0
Hide thumbs Also See for PRO GEAR EXPRESS SPE1250KW:
Table of Contents

Advertisement

SECTION 3 - OPERATING
INSTRUCTIONS
3.4
STARTING
& OPERATING
(Continued from previous page)
13.
STOPPING MACHINE,
Simultaneously
squeeze
both
Traction
Levers
firmly against the handle and hold. Pull both the
right and left Traction Locks rearward with index
fingers until both Traction Levers are locked in the
Traction Locked position.
14.
Pull the Blade Clutch Switch rearward to the OFF
position. See Figure 3.7.
BLADE CLUTCH
SWITCH SHOWN
IN OFF POSITION
SWITCH
FIGURE 3.7
15.
Place
the
Transmission
Shift
Lever
into
the
NEUTRAL (N) position.
16.
Move
engine
speed
control
to
slow
(Turtle)
position.
17.
Stop engine. Turn key switch to "Stop" position.
Remove key. See Figure 2.1.
WARNING
AI
DO NOT leave machine with engine running. Stop
I
engine. Stop blades. Lock Traction Levers. Removel
key. DO NOT park machine on slopes.
WARNING
DO NOT operate
blades in reverse. Stop blades.
LOOK and SEE behind and down for children, pets
and
hazards
before
and while
backing.
Engine
speed must be set to SLOW before operating
in
reverse.
3.5
REVERSE
OPERATION
3.5.1.
TO REVERSE DIRECTION
1.
To REVERSE
DIRECTION
OF MACHINE,
STOP
Machine and lock Traction Levers.
2.
Pull Blade Clutch
Switch
rearward
to the OFF
position.
Move Engine Speed Control Lever to slow
(turtle) position.
3.
Move Transmission
Shift Lever to REVERSE (R)
position.
4.
Hold Operator's
Presence Control (OPC) against
handlebar.
5.
To START MACHINE MOVEMENT,
simultaneously
squeeze
both Traction
Levers firmly
against the
handle allowing the right and left Traction Locks to
release.
6.
Using caution, simultaneously and slowly release both
Traction Levers. The machine will begin to move in
reverse.
7.
To STOP forward or reverse motion, firmly squeeze
both Traction Levers towards the handle and hold.
Using your index fingers, pull right and left Traction
Locks
back
until
both Traction
Levers
lock in
Traction Locked position. See Figure 3.8.
\
1. SQUEEZE
TRACTION LEVERS
2. PULL TRACTION
LOCKS
REARWARD
TO LOCK
TRACTION LOCK
TRACTION LEVER
(RIGHT HAND - RELEASED
POSITION
SHOWN)
FIGURE 3.8
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spe481Spe140kwSpe361Spe150kh

Table of Contents