Important Safety Instructions - Snapper P216019KWV Safety Instructions & Operator's Manual

IMPORTANT SAFETY INSTRUCTIONS
MAINTENANCE AND STORAGE
(Continued From Previous Page)
9. Mower blades are sharp and can cut. Wrap the
blades or wear heavy leather gloves and use
CAUTION when handling them.
10. DO NOT test for spark by grounding spark plug next
to spark plug hole; spark plug could ignite gas
exiting engine.
11. Have machine serviced by an authorized SNAPPER
dealer at least once a year and have the dealer install
any new safety devices.
12. Use only genuine SNAPPER replacement parts to
assure that original standards are maintained.
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance
has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine
power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine
variability. Given both the wide array of products on which engines are placed and the variety of environmental
issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used
in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of
factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-
engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of
higher rated power for this Series engine.
Usage Statement I
This manual contains safety information to make you aware of the hazards and risks associated with the I
machine and how to avoid them. This machine is designed and intended to be used and maintained according I
to the manual for finish cutting of established lawns and is not intended for any other purpose. It is important
that you read and understand these instructions thoroughly before attempting to start or operate this equipment.