Cooper Lighting MS188 Instruction Manual page 6

4.
Walk across the detection zone at the farthest distance you wish your
detector to detect motion.
5.
Adjust sensitivity until you get desired results. Light will turn off 4 seconds after
all motion stops.
6.
Move slide switch to 4 MIN. or 12 MIN. (AUTO mode). At dusk, lights will
operate in the AUTO setting.
SELECTING YOUR MODE OF OPERATION
Mode of
Operation:
Auto setting
(motion activated)
Lights should turn on with motion
only at night and
should turn off after
4 or 12 minutes of no motion.
Dusk to Dawn Setting
(activated only at night)
Lights should stay on from dusk
to dawn and then reset to the
auto setting next dawn.
Standard Floodlight Setting
Lights should stay on
continuously both day and night
(must be reset manually).
Test Setting
Lights should turn on with
motion both day and night.
Lights should turn off after
4 seconds.
Return to Auto Setting
(motion activated)
From any of the above
setting.
Call for customer service and/or missing or damaged parts (800-334-6871)
Set slide switch
on sensor to:
AUTO 4 MIN
or
AUTO 12 MIN
AUTO 4 MIN
or
AUTO 12 MIN
TEST
TEST
AUTO 4 MIN
or
AUTO 12 MIN
6
How to Set
Power Switch:
Keep the power to
the fixture on.
Turn power on and off twice
within 3 seconds.
Turn power on and off twice
within 3 seconds.
Keep the power to the
fixture on.
Turn the power "OFF" for at least
90 seconds, then
back "ON".