Advertisement
Advertisement
Related Manuals for Cooper Lighting MAC100
Summary of Contents for Cooper Lighting MAC100
- Page 1 Instruction Manual Instrucciones Directives MAC100...
- Page 2 MAC100 Congratulations! You have purchased a Cooper Lighting motion activated floodlight. This security lighting system will provide years of convenience and protection for your family and home. How it works 70 feet Your Cooper Lighting motion activated camera and floodlight security system delivers color images and audio through the use of digital wireless technology.
- Page 3 • Follow all instructions. • Do not use this apparatus near water. • Clean only with a dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Page 4 Cooper Lighting and ETL have not tested the performance or reliability of the security or signaling aspects of this product. ETL has only tested for fire, shock and/or casualty hazards as outlined in UL’s Standard(s) for Safety UL 6500.
-
Page 5: Installing The Bulb
For best results • Install your fixture 8-12 feet above the ground. • Locate fixture so motion moves across detection zone (L) • Locate fixture away from heat producing sources to prevent false triggering. Also be very careful not to include objects such as windows, white walls and water in the detection zone whenever possible. - Page 6 Step 6: Apply silicone caulking around the edges of coverplate and in any open screw holes for a watertight seal. Step 7: Adjust the antenna upright and vertical to the ground (P). Step 8: Turn power on at main fuse/breaker box. How to operate your fixture Step 1: Make sure motion sensor and wireless receiver are set to the same house code (fixtures will...
- Page 7 Note: The LUX Adjustment Knob determines when the floodlight will begin operating. Turn the motion sensor LUX control knob clockwise to the moon (dusk) position. In this setting the floodlight will remain in the OFF position during daylight hours. If you would like the floodlight to turn on early (before dusk), move the knob closer to the position.
- Page 8 Step 5: If more than one security camera floodlight is used, different house codes must be selected on each unit and can be viewed on the same TV at different times by selecting the appropriate house code on the wireless receiver. How to select your desired feature Desired Set Time Adjust...
- Page 9 What to do if… Is there power to the fixture? OUTDOOR LIGHT • Check to see that the circuit breaker has not been tripped. DOES NOT COME • Be sure the wall switch is in the “ON” position. ON WITH MOTION •...
- Page 10 1121 Highway 74 South, Peachtree City, GA 30269 www.cooperlighting.com Patent Pending © 2006 Cooper Lighting Reproductions of this document without prior written approval of Cooper Lighting are strictly prohibited. Call for customer service and/or missing or damaged parts (800-334-6871) Printed in China...