Table of Contents
Advertisement
External Control Panel
Keystone/ Left
Menu
•
The Infrared Remote Receiver (Front and Rear) allows the projector to
accept signals from the remote control. For best results, be sure to aim the control
toward the sensor without any obstructions between the two, and at a distance no
greater than 6 meters.
•
Menu will display the menu system on screen. Press Menu again to access the
sub-menus. Left and Right help you navigate among choices and settings in the
menus and sub-menus. However, when the on screen menu is not activated, the
Left and Right buttons will function as Keystone +/- hot keys.
•
Press the Exit button to go back to the main menu. Press Exit again to leave the
menu system.
•
The Status Indicator will blink or light up when the lamp needs service, cooling
or replacement. See "Lamp Information" on page 19. for more detailed
information.
•
When the projector is on, Back-lit Power will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
•
Press Power for 1 second to turn the projector on or off.
•
Auto key: Automatically sense the best picture quality for current received signals.
•
Source key: Select signal sources, PC, Video, S-video and YPbPr.
Auto
Source
Lamp status
indicator
User's Manual
Exit
Keystone/ Right
Power
Introduction
5
Advertisement
Table of Contents
