Table of Contents
Advertisement
Section 2 - OPERATING INSTRUCTIONS
2.7. REVERSE LOCKOUT MECHANISM
Data indicates that tragic back-over accidents occur
each
year.
These
unsupervised children. Many times these children have
been given rides on the machine and have been trained
to view this potentially dangerous piece of machinery as
fun rather than being taught how to avoid danger.
This riding mower has a Reverse Lockout Mechanism.
This mechanism prevents the mower from being shifted
into reverse with the blades running. To shift into reverse
you must first stop the blades and then shift to reverse. It
is our recommendation that this mechanism remain
functional and the operator of this equipment develop
the habit of never backing up with the blades running. As
the Safety Instructions Indicate, DO NOT operate
blades in reverse. STOP BLADES, LOOK AND SEE
BEHIND AND DOWN for children, pets and hazards
before and while backing.
We realize that this could cause a change to your
previous mowing method but we encourage you to
adjust to this new system. Do not defeat the Reverse
Lockout Mechanism.
If you operate your mower near roadways or use
attachments that require quicker shifting to reverse,
there is an override lever provided. This lever can be
pushed and held before starting the blades and will allow
reverse operation until the blade engagement lever is
moved to the "OFF" position, at which time the system
will return to its Reverse Lockout mode. This feature
should never be selected unless you are absolutely sure
that no children or others are present in the mowing area
and that all children are away and supervised by a
responsible adult.
accidents
usually
involve
2.7.1.
Reverse Lockout Mechanism Override
1.
Stop machine. Stop blades.
2.
Depress and hold Override Lever.
3.
Raise blade engagement lever to "ON".
4.
Release override lever.
LOOK and SEE behind and down for children, pets
and hazards before and while backing.
IMPORTANT! DO NOT use the Reverse Lockout
Mechanism Override as the normal operating mode. To
return to the Reverse Lockout Mechanism mode, move
the blade engagement lever down to the "OFF" position.
The Override will reset to Reverse Lockout.
2.7.2.
Check the Reverse Lockout Mechanism
Before each use, check the Reverse Lockout
Mechanism
for
following check with the engine "OFF".
1.
With engine "OFF", raise blade engagement
lever to "ON".
2.
The Reverse Lockout Mechanism must
prevent the speed control lever from going into
reverse.
DO NOT operate machine if Reverse Lockout
Mechanism is not functioning properly. Contact your
SNAPPER dealer immediately for assistance.
LOOK and SEE behind and down for children, pets
and hazards before and while backing.
BLADES must be turned off before backing
machine.
DO NOT allow children on machine (even with
blades off) or in yard when mowing.
12
WARNING
proper
function.
Perform
WARNING
DANGER
the
Advertisement
Table of Contents
