Showing Web-Based Content (Html5 Browser) - Sharp PN-HM851 Software Manual

Showing Web-based content (HTML5 Browser)

n Setting the start page
When first using the HTML5 Browser, you must set the content that is shown initially.
1. Select "Setup" on the CONTENT MENU screen of APPLICATION mode.
2. Select "HTML5 Browser".
3. Select "Default Site".
4. To show content in local storage
(1) S elect "File".
(2) S pecify the HTML content you want to show.
To show content on the Web
(1) S elect "Web URL".
(2) E nter the URL.
(3) S elect "OK".
If you want to display the PC site rather than the mobile site, set "Desktop Site" to "Enabled".
TIPS
• Multiple USB flash drives cannot be used at the same time with HTML5 Browser.
If you insert multiple USB flash drives with local storage, only the flash drive inserted first can be used.
n Starting the browser
Select "HTML5 Browser" on the CONTENT MENU screen of APPLICATION mode.
The specified Web content is shown.
TIPS
• You can set the HTML5 Browser to start automatically when APPLICATION mode start up.
Select "Startup" on the CONTENT MENU screen and set "HTML5 Browser".
n Exiting the browser
1. Press the RETURN button.
14
E