Beginner - Tunturi FitCycle 50i User Manual

Manual mode
- Use Dial UP/ DOWN key to select workout
program, choose MANUAL mode and press mode
key to enter next setting entry for manual mode
program.
- Use Dial UP/ DOWN key to pre-set training time (
fig. - F-07), and press M to confirm the setting.
- After confirm you can set also:
distance ( fig. - F-08), Calories ( fig. - 09), and Pulse.
( fig. - 10)
NOTE
• When setting more than one goal, the training
will end at first achieved goal.
• Leave a goal blank and it will not be seen as a
pre-set limit.
- Press START/ STOP key to start workout
- Use Dial UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window ( fig. - F-11)
Beginner mode (fig. G1~G4)
- Use Dial UP/ DOWN key to select workout
program, choose BEGINNER mode and press mode
key to enter next setting entry for BEGINNER mode
program.
- Use Dial UP/ DOWN key to select BEGINNER
program 1~4 ( fig. - 12) and press MODE to
confirm.
- Use Dial UP/ DOWN key to set time, press MODE
to confirm.
- Press START/ STOP key to start workout
- Use Dial UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window ( fig. - 11)
Advance mode (fig. G5~G8)
- Use Dial UP/ DOWN key to select workout
program, choose ADVANCE mode and press mode
key to enter next setting entry for ADVANCE mode
program.
- Use Dial UP/ DOWN key to select ADVANCE
program 1~4 ( fig. - 13) and press MODE to
confirm.
- Use Dial UP/ DOWN key to set time, press MODE
to confirm.
- Press START/ STOP key to start workout
- Use Dial UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window ( fig. - 11)
Sporty mode (fig. G9~G12)
- Use Dial UP/ DOWN key to select workout
program, choose SPORTY mode and press mode
key to enter next setting entry for SPORTY mode
program.
- Use Dial UP/ DOWN key to select SPORTY program
1~4 ( fig. - 14) and press MODE to confirm.
- Use Dial UP/ DOWN key to set time, press MODE
to confirm.
- Press START/ STOP key to start workout
- Use Dial UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window ( fig. - 11)
Cardio mode.
- Use Dial UP/ DOWN key to select workout
program, choose CARDIO mode and press mode
key to enter next setting entry for CARDIO mode
program.
- Use Dial UP/ DOWN key to set age ( fig. - 15)
- Use Dial UP/ DOWN key to select 55% ( fig. - 16),
75%, 90% or TAG (Target H.R. _ Default 100)
- Use Dial UP/ DOWN key to set time, press MODE
to confirm.
- Press START/ STOP key to start workout
- Use RESET, to go back to main menu.
Watt Mode.
- Use Dial UP/ DOWN key to select workout
program, choose WATT and press MODE / ENTER
key to enter next setting entry for WATT mode
program.
- Use Dial UP/ DOWN to set WATT target. (default:
120Watt, Fig. F-18)
- Use Dial UP/ DOWN key to set TIME.
- Press START/ STOP key to start workout.
Use Dial UP/ DOW) to adjust target Watt level.
- Press START/STOP key to pause workout.
- Use RESET to go back to main menu.
Recovery
- The RECOVERY key will only be valid if pulse is
detected.
- TIME will show „0:60" (seconds) and counts down
to 0.
- Computer will show F1 to F6 after the countdown
to test heart rate recovery status. User can find the
heart rate recovery level based on the chart below.
- Press RECOVERY key again to return to the
beginning.
F1 Outstanding
F2 Excellent
F3 Good
F4 Fair
F5 Below average
F6 Poor
Body Fat
- Press the BODY FAT key to start body fat
measurement.
- During measuring, users have to hold both hands
on the hand grips. LCD display "-" "- -" "- - -" "- - -
-" for 8 seconds until computer finish measuring.
- LCD will display BMI and FAT %.
2 3
English